SIZE: 48” X 16’ Nominal
5- LAYER 7.5” Nominal
3- LAYER 4.5 Nominal
Moisture Content: 14% (+ or – 2% at time of Production)
Wood Species: SYP – SPF
Major Axis: SYP- Grade 2 & 3 KD
Minor Axis: SYP – SPF Grade 3 KD
Proprietary Finger Joint Lengthwise
GREEN PRODUCT FORMALDAHIDE FREE
*Proper Use According to Customers Engineer Design Loads
WAX SEALER on all Four sides to Prevent Wicking moisture. This extends the life of the mat, Water can dry off the face of a Mat but the sides are open grain, without this it is like putting Valuable lumber in a Bathtub.
Weight Approx. 1600 – 48” X 16’—5 Layer
Delivery TL- 32 TriAxle-16’ Mats
Terms C O D
Delivery Time 3-4 Week Lead Time with Purchase Order
Each Mat is drop tested and lumber inspected to Meet or Exceed ANSI/APA PRG 320 CLT Standards.
VISUAL APPEARANCE specifications applies to CLT Panels where both Faces are either concealed by another lamination.
XLAM MATs are an INDUSTRIAL PRODUCT and can display knots, checks, wane, bark pockets, adhesive patches and variation in color and other minor visual defects.
APPEARANCE has no bearing on STRUCTUAL PERFORMANCE and will perform equally and according to their LUMBER GRADE.
XLAM MATs are not isotropic so loading only for the major strength direction with minimum number of effective layers as required in ANSI/APA PRG 320 CLT Design.
In simple Terms the part of the Mat that carries the load is the Longer Lumber, the Cross pieces do the same work as Bolts do in timber Mats, But by changing the direction of the Grain similar to Plywood on steroids it makes the individual pieces
Act as ONE versus Bolted Mats as the timber dries out and the Bolts Bend, the timber Mat acts like individual Planks instead of a Solid unit.
Stuart XLAM mats Tough and Safe
XLAMmats carry a higher load than bolted mats because they are ONE Solid ELEMENT.
more than 500,000 in use in the USA!
Over 50 years of work and happy customers.
Order yours today, call Stuart NOW 203-376-0036 for your delivery.
The best move you’ll ever make, guaranteed!